1     Digital Temp. Indicator
        up to  18000C ( 5 Points )
2     Digital / Blind Temp. Controller 
        up to  18000C ( 5 Points )
3     PID Controller 
        up to  18000C ( 5 Points )
4     Temp. Scanner ( per Channel)
        up to  18000C ( 5 Points )
        (a) Per Channel ( up to 03 channel )
        (b) Additional charges per channel )
5     Glass Thermometer (Up to 6000C)
        (a) 05Points 
        (b) Additional charges per point
6     RTD (Up to 3000C)
        (a) 05Points 
        (b) Additional charges per point

7     Thermocouple (Up to 15000C)
        (a) 05Points 
        (b) Additional charges per point
8     Temperature Gauge (Up to 15000C)
        (a) 05Points 
        (b) Additional charges per point
9     I.R. Thermometer ( Up to 14000C)
10     Temperature Transmitters (Up to             15000C)
        (a) 05 Points
        (b) Additionalcharges per point
11     Hygrometer( 0 to 1000C)
        (a) Dry - Wet Type
        (I) 05 Points
        (ii) Additional charges per point
        (b) Digital / Analog ( 0-1000C & upto          95% RH )
        (I) 05 Points
        (ii) Additional charges per point

12     Humidity Chamber( Up to 95% RH )
        (I) 05 Points
        (ii) Additional charges per point
13     Incubator / Oven ( Up to 15000C )
        (I) 05 Points 
        (ii) Additional charges per point
14     Furnace / Dry Block Calibration 
        ( Up to 15000C)
        (I) 05 Points
        (ii) Additional charges per point
15     Temperature Calibrator
        mV & mA ( Single Channel)
        mV & mA ( Double Channel)

1      Vernier Caliper(Electronic/Dial/Scale)
        (a) 0 - 150 mm
        (b) 0 - 200 mm
        (c) 0 - 300 mm
        (d) 0 - 450 mm
        (e) 0 - 600 mm
        (f) - above 600 mm
2     Height Gauge (Electronic/Dial/Scale)
        (a) 0 - -150 mm
        (b) 0 - 300 mm
        (c) 0 - 450 mm
        (d) 0 - 600 mm
        (e)Above 600 mm
3     Depth Gauge(Electronic/Dial/Scale)
        (a) 0 - -150 mm
        (b) 0 - 300 mm
        (c) 0 - 450 mm
        (d) 0 - 600 mm
        (e)Above 600 mm
4     Inside Micrometer
        (a) 0 - 25 mm / 25 - 50 mm
        (b) 50 - 200 mm
        (c) 50 - 300 mm
        (d) 50 - 500 mm
        (e) Above 500 mm
5     Depth Micrometer ( Electronic/Scale )
        (a) 0 - 25 mm / 25 - 50 mm
        (b) 0 - 50 mm
        (c) 0 - 300 mm
6     Dail Gauge ( Plunger Type )
7     Dail Gauge ( Lever Type )
8     Puppy Dial
9     Dial Bore Gauge
        (a) without Dial
        (b) with Dial
10     Outside Micrometer
        ( Electronic/Dial/Scale )
        (a) 0 - -25 mm/ 25 - 50 mm /
            50 - 75 / 75 - 100 mm
        (b)101 - 200 mm
        (c) 201 - 300 mm
        (d) 301 - 400 mm
        (e) 401 - 500 mm
        (f) Above 500 mm

11     Plain Plug Gauge ( GO / NOGO )
        (a) Up to 50 mm / 50 - 100 mm
        (b) 101 - 300 mm / 301 - 401 mm
12     Thickness Gauge
        (a) 0 - 100 mm
        (b) Above 100 mm 
14     Plain Ring Gauge
        (a) Up to 50 mm / 51 - 150 mm
        (b) 151 - 250 mm / 251 - 400 mm
15     Measuring Pin Gauge
        (a) Up to 10 Pcs ( Per Piece )
        (b) Above 10 Pcs ( per Piece )
16     Feeler Gauge( Per blade )
17     Slot Gauge
18     Taper Gauge
19     Snap Gauge
        (a) Up to 50 mm / 51 - 100 mm
        (b) Up to 101-200 mm / 201-400 mm
20     Alignment Tool
21     Electronic Dial Calibration Tester
        (a) 0 - 10 mm
        (b) 0 - 25 mm
22     Electronic Probe
        (a) 0 - 10 mm
        (b) 0 - 25 mm
23     Flush Gauge
24     Radius Gauge
        (a) 01 Set Up to 25 Pcs.
        (b) Additional charges per piece
25     Pick Test Dial
26     VEE Block
        (a) Up to 6"
        (b) Above 8"
27     Ford Cup
28     Pressing Master Gauge
29     Inside/Outside Compass ( 0-100 mm)
30     Brinnel Hardness Tester
31     Thread Plug Gauge
32     Thread Ring Gauge
33     Slip Gauge Set ( Grade 0,1,2 )
        (a) up to 10 Pcs.
        (b) 10 to 50 Pcs.
        (c) Above 50 Pcs

34     Slip Gauge Accessories ( Per Piece )
35     Spirit Level ( Any Range )
36     Square Master ( Any Range )
37     Steel wire Gauge ( Any Range )
38     Steel scale
        (a) 0 - 600 mm
        (b) 0 - 1000 mm
39     Steel scale
        (a) 0 - 600 mm
        (b) 0 - 1000 mm
        (c) Above 1000 mm
40     Measuring Tape
        (a) 0 - 5 meter
        (b)0 - 15 meter
        (c) 0 - 50 meter
41     Special Jigs
42     Hole Master
43     Flang Micrometer
        (a) 0 - 50 mm
        (b) 50 - 300 mm
        (c) 100 - 300 mm
44     Bevel Protector / Angle Protector
45     Caliper Checker ( upto 600 mm)
46     Height Master
        (a) 0 - 300 mm
        (b) 0 - 600 mm
47     Rockwell Hardness Tester
48     Profile Projector
        (a) 300 mm sq.dia
        (b) 600 mm sq. dia
49     Sine Bar ( Any Range )
50     Surface Plate(Per Sq. Cm)
51     Tensile Testing Machine
        (a) 250 Kgf to 1000 Kgf
        (b) Up to 5000 Kgf
52     Try Square (Any Range)
53     Angle Plate
54     Bench Tester
                       

1     Micro/Milli/Ampere Meter(AC/DC)
2     Milli Ampere Calibrator
        (a) Single Range
        (b) Dual Range
3     Micro/Milli Voltmeter(AC/DC)
4     Ohm Meter/Resistance Box
        Acc. = + 0.1%
        Acc. = + 0.002%
5     Micro / Milli /Mega Ohm Meter
6     Ampere Meter (DC)
        0-40 Amp.
        (a) Single Range
        (b) Additional Charges per range
        CT Based (Any Range)
        (a) Single Range
        (b) Additional Charges per range
        Ampere Meter (AC) 0-33 Amp.
        (a) Single Range
        (b) Additional Charges per range
        C.T. Based (Any Range)
        (a) Single Range
        (b) Additional Charges per range
7     Voltmeter (DC)
        0-1000 Volt.
        (a) Single Range
        (b) Additional Charges per range
        P.T. Based (Any Range)
        (a) Single Range
        (b) Additional Charges per range
        Voltmeter (AC)
        0-1000 Volt.
        (a) Single Range
        (b) Additional Charges per range
        P.T based ( Any Range )
        (a) Single range
        (b) additional charges per channel

8     Frequency Meter
9     L.V.D.T. Senser
10     High Voltage Tester
11     Millivolt Calibrator
        (a) Single Range
        (b) Dual Range
12     Multifunction Calibrator
13     Digital Multimeter
        (a) 31/2 Digits
        (b) 41/2 Digits
        ( c) 51/2 Digits
14     Tong Tester / Clamp Meter
15     Insulation Tester / Megger
16     Regulated power Supply( AC / DC)
17     Lux Meter
18     Watt Meter
        (a) Single phase
        (i) Single Range
        (ii) Additional charges per range
        (b)Three phase
        (i) Single Range
        (b) Additional charges per range

19     Current Transformer
        (a) Per Range
        (b) Additional charges per range
20     Cut Through Tester
21     Digital Panel Meter
22     V - A - W Meter
23     V -A - H - Hz Meter
24     Million Megaohm Meter
25     K.V. Meter
26     Variac.
27     Potential Transformer
        (a) Per Range
        (b) Additional charges per range
28     Energy Meter
29     Inductive Load
30     K.W.H. Meter
31     LCR Meter
32     P.F. Meter
33     Spark Tester
34     Ampere - Hour Meter

1     Pressure Gauge( Up to 600Kg/Cm2)
2     Vacuum Gauge/Barometer(0-760mmHg)

3     Pressure / Vacuum Transmitter
4     Manometer ( 0 - 760mmHg)

5     Dead Weight Tester( Up to 600 Kg / Cm2)
6     Digital Pressure Controller

1     Load Cell
        (a) Up to 200 gm
        (b) 200 gm to 2 Kg
        (c) 2 Kg to 5 Kg
        (d) 5 Kg to 10 Kg
        (e) 10 Kg to 20 Kg
        (f) Above 20 Kg

2     Torque Indicator
        (a) Up to 200 gm
        (b) 200 gm to 2 Kg
        (c) 2 Kg to 5 Kg
        (d) 5 Kg to 10 Kg
        (e) 10 Kg to 20 Kg
        (f) Above 20 Kg

3     Rubber Hardness Tester
        (a) Shore A
        (b) Shore D
4     Push Pull Gauge / Meter ( 0 - 300 Kg)
5     Torque Wrench ( 0 - 550 N.m. )
       

1     Digital / Analog Weighing Balance
        (a) Up to 200 gm
        (b) Up to 500 gm
        (c) Up to 5 Kg
        (d) Up to 10 Kg
        (e) Up to 20 Kg
        (f) Up to 30 Kg
        (g) Up to 50 Kg
        (h) Up to 100 Kg
        (I) Up to 300 Kg
        (j) Above 300 Kg

2     Standard Weight Box
        (a) Up to 200 gm
        (b) Additional charges per weight(12 pcs)
3     Standard weight Box
        (a) Up to 500 gm
        (b) Additional charges per weight(12 pcs)

4     Standard Weight Box
        (a) Up to 5 Kg ( Each )
        (b) 5 Kg to 20 Kg ( Each )
        (c) 20 Kg to 50 Kg ( Each )
       

1     Digital Timer / Counter
2     Stop Watch
3     pH Meter (0-14pH )
4     Flow Meter / Rotameter(Any Range)
5     Standard Transmitter

6     RPM / Techometer
7     Digital Sound Level Meter / dB Meter
8     Hydrometer
9     Specific Gravity Balance
10     Moisture Balance

11     Dew Piont Tester
12     Anemometer
13     Density Bottle
14     Coat Measure